10 tips for carving in Oak

I have recently completed a job carving an egg and dart pattern into oak moulding for the edge of a table top, you can see this in the photo.

Egg and dart pattern carved into oak moulding
Egg and dart pattern carved into oak moulding to edge a table top

While I was working on this job I thought of some things to think and work through the next time I have an oak carving to do.

Hopefully these tips will help you too.

If this is your first carving project please choose another wood now before you read any further. While I enjoy carving oak it is a little difficult for a first piece, choose something a little easier – Lime or Jelutong if you can get it are excellent starting points. I have spoken to several beginners who have been completely put off carving by using oak their first time out.

Be careful that the design you are carving is fairly bold and not too intricate as you will be fighting the very open grain of the wood which will make for a highly frustrating and unpleasant carving experience.

When you are estimating how long the carving will take you, take your estimate and multiply it by at least twice and then add some more.

Allow for a practice piece so that you can get a feel for the wood and the gouges/chisels you will need before you start on the actual work. It does not need to be a full size piece just a bit to try things out on.

Check the pattern/measurements before you start as mistakes on a carving that will not be gessoed (for gilding or painting) or painted are very hard to disguise.

Secure the work to your bench as well as you can, if the piece moves during a vital cut it could ruin the whole design.

Make sure that your tools are sharp and keep them honed. When you carve it should feel like a hot knife cutting through butter – if you don’t know what that feels like give it go when you eat your dinner (with a cutlery knife not a chisel/gouge!). Cut a hot potato with the knife first then cut some butter or margarine with the same knife, this should give you the right feeling.

Use shallow cuts and build up to the depth you want. It is more time consuming but will make the carving easier.

Try to use a carving mallet as much as you can, it will save your hands and control the cuts.

Do not try to work long hours on the job especially at first. Oak can be very hard on the hands which may over time cause a strain.

These are just 10 tips that I came up with, if you can think of any more please leave them as a comment below, I’d love to hear them.

 

 

 

 

Jutta M Stiller is a wood carver and sculptor specialising in Netsuke and Couture frames click here to subscribe to her newsletter ‘Tales From the Woodcarving Bench’ .

 

Photograph from location shoot

Here is a sneak peak of the pictures I took while on location at Parkwood the other week.

This Sculpted Mirror is made from European Oak. I make all the wooden parts of the mirror starting from a plank, making the moulding, carving the design and putting it all together. I also cut the mirror myself – which is nerve racking for me at the best of times!

Sculpted Mirror In Oak
Sculpted Mirror In Oak

I really enjoyed taking the time to go on location and take these photographs, I had forgotten what fun it can be. It also takes away all the worry of lighting and backdrops, the only thing you have to worry about is what you have reflected in the mirrors. Quite a few of the images ended up with very strange reflections!

Of course you have to pick a decent day to do the shoot, we were really lucky in that theĀ  day was nice and sunny and it didn’t start to rain until we were leaving. Magic.